Hi, I'm new here, and need some help with KRESS router

[Tadas25]

Hi all,
I hope you will help for beginner.

Its a problem with KRESS router, I have bought Kress 1050FME router, and now I need to fit 1 mm milling cutter. I planning to buy chuck holder for er-11 or er-16 collets type, but i don't know what chuck holder will fit with my kress router.

So please, if anyone knows WHAT CHUCK HOLDER FITS TO KRESS ROUTER, write a name or link where to buy

I will be very thankful !



Similar Threads:

• kress router collects
• Cual motor elegir como spindle KRESS 800w vs KRESS 1050
• Kress 800w router
• Build Thread- Kress Router...any good!
• kress router

[Maran]

You can try here: http://www.cnc-plus.de/index.php?cat...-and-ISEL.html

[Tadas25]

You can try here: http://www.cnc-plus.de/index.php?cat...-and-ISEL.html

Thanx for the link, but there is no 1mm collet :/

What routers you guys using ?

[rrdiaz30]

Kress 1mm collets are here:

http://www.worldofcnc.com/products.a...tegory=Collets

Regards...Rick

[Tadas25]

Kress 1mm collets are here:

http://www.worldofcnc.com/products.a...tegory=Collets

Regards...Rick

MANY THANX !!!

Can I buy a couple bear for you ?