Results 1 to 3 of 3

Thread: newbie need to learn mach 3 where to start

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    out here
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default newbie need to learn mach 3 where to start

    I would like to get some advice from experanced users where to
    start learning mach3, and understanding how to write / build g code
    with other software?
    where is the best place to start... would like to read or watch video
    in fundmental of for begineers?

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Twp, MI....USA
    Posts
    24915
    Downloads
    0
    Uploads
    0
    Gerry

    Mach3 2010 Screenset
    http://home.comcast.net/~cncwoodworker/2010.html

    JointCAM
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Mar 2008
    Location
    out here
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default looking for examples...

    I looked in the below link.... its a start.......but it seams to all over the place
    with no specific lessons or order for the beginer.


    Does anyone have any simple eg. of a how too... video of a small project with one or two passes of ie small sq cut out eg.

    maybe someone have some youtube videos.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed