Identify the gantry

[plugski]

Hi all, I have been posting here with my CNC build..... http://www.cnczone.com/forums/diy-cn...48558-cnc.html

I purchased an incomplete machine that I have started to build and after sorting through all the parts I am missing the Y and Z assemblies.

Some of the electronics were purchased from CNCROUTERPARTS and I have contacted them and they definitely did not make the table and gantry..... I have a feeling it was a chinese bolt together table as the welds were so poor they cracked and I TIG'ed it all up now....

So my question is, can anyone shed some light on this gantry setup as it would be ideal to just buy the missing Y and Z carriage assemblies instead of making them from scratch.???

Or if anyone has seen or made something similar that might work on my setup up...???



Similar Threads:

• Build Thread- Gantry mill with moving gantry for Z-axis
• Need Help!- Need thoughts and ideas on changing a single sided gantry to 2 sided gantry...
• Fixed gantry vs moving gantry
• Gantry: planning to design moving open gantry
• Diffrences between bulltear cnc gantry kits and torchmate2 gantry kits