After almost destroying my Gecko G540 due to an electrical issue of my own creation. I've figured out how to wire in a new power plug input. But the original switch I had at the front of my controller has me stumped. It has 4 pins and an LED. Originally it would stay lit even after I had turned the power off. Has anyone any idea how I should wire this to alleviate this issue using all 4 of the Pins?
Just pull-out the two upper wires and transfer it to the bottom connectors, same as the two bottom wires, transfer it to the top the same switch position.
Reply with Quotethe same switch position.
Adding New DPDT Switch
