That is good news. Have fun with it and post up some progress photos or videos.
So I think I worked out all my issues. First I bought new SainSmart 2M542 drivers. It was then working good for a day then the x axis started acting up again going in different directions. I realized that I didnt solder all the wires because I was waiting to make sure everything was good before I did it. I had to extend the motor wires and one of the extensions was barely connected. I soldered every wire and now its running perfect.
Thanks for all the help.
That is good news. Have fun with it and post up some progress photos or videos.
Lee
Did this last night. Just ordered a bunch of better end mills.