Reply with QuoteSo there was a vacuum leak. I really thought that this unit was zoned but i was mistaken. Opened it up to see if i could find the leak. Decided to put it away for now cause i could not be bothered trying to fix design issues.
Re: CNC router build
Hi Ian, i bought a vacuum pump and tank. Hope to get that working
Re: CNC router build
So there was a vacuum leak. I really thought that this unit was zoned but i was mistaken. Opened it up to see if i could find the leak. Decided to put it away for now cause i could not be bothered trying to fix design issues.
Re: CNC router build
Busy adding covers over the ball screws and rails, also sorting some loose hanging cables. Next will be mounting all the proxies and getting the dust extraction hooked up
Re: CNC router build
Well...the machine is sold now. Not sure when i will start on a new one
Re: CNC router build
You will miss it, you put a lot of time into building it, one way to look at it, the next one will be even better than the firstOriginally Posted by ericks
Well...the machine is sold now. Not sure when i will start on a new one
Mactec54
Re: CNC router build
For sure it will be missed. The 6040 is coming back, i need a machine for electronic/pcb prototyping.You will miss it, you put a lot of time into building it, one way to look at it, the next one will be even better than the first
