Reply with QuoteVideo kept stopping, and when I tried to download it, the download failed.
Upgraded my drivers and steppers.
Upgraded my old Hobbycnc board and steppers to kit from stepperonline. Went from 125 to 439 OzIn . Just got it running,
I posted a video my machine and the updated wiring at this link:
http://www.wjbzone.com/Video/CNC_Router170513.mp4
Please excuse the mess in my garage, it is a little tight for space.
Similar Threads:
Re: Upgraded my drivers and steppers.
Video kept stopping, and when I tried to download it, the download failed.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Upgraded my drivers and steppers.
First time I've done a video and uploaded. Might not have reduced the size enough. Works on my connection at home and work.
Re: Upgraded my drivers and steppers.
I uploaded a video to my site last week, and people experienced the same issue, although it worked for me as well.
I normally upload to YouTube.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Upgraded my drivers and steppers.
Cool! You should be happy with the extra torque and speed!
Posting Permissions
