New Engraving

[fretman_2]

i think this is going to be my logo engraving on neck plates. 6061 aluminum, 6ipm feed, 3ipm plunge, .01 depth of cut, .0025 step down, 1/8" 30 degree vbit. I'm proud that my big, by my standards, machine can do such detail work.



Similar Threads:

• Need Help!- New to laser engraving - black smoke/dust on the product surface after engraving
• Newbie- Chinese Laser Cutting and Engraving Machine TS-6040 60w - Engraving problem
• PHCAD setting cut after engraving deeper engraving
• Distinction between laser engraving between special LGP engraving machine when produ

[wizard]

Any meaning behind it?

Looks good to me, simple and uncluttered = easy to recognize.

[louieatienza]

Nice... and yes, even on my router table, with 8-start (1TPI) leadscrews, I was still able to resolve very fine detail that I thought would be lost with the rather coarse pitch screws, but it's a testament to how well the system works as a whole.

[fretman_2]

Well...yes and no. I mainly just like the design, but it's like this...I love my wife more than the sun, moon and stars.

Any meaning behind it?

Looks good to me, simple and uncluttered = easy to recognize.

[fretman_2]

I agree. Overall, I'm finding that the machine is doing exactly what I wanted it to do.

Nice... and yes, even on my router table, with 8-start (1TPI) leadscrews, I was still able to resolve very fine detail that I thought would be lost with the rather coarse pitch screws, but it's a testament to how well the system works as a whole.