I am building a rather large router table and am looking at two steppers on the x-axis. I know one will be considered a-axis. Do the two steppers run the same rotation or does one run counter direction from the other?
Similar Threads:
With screws, they usually spin the same. With rack and pinion, they usually spin opposite.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)