16c Air closer sealed valve

[egvdw]

Looking to find out if its possible to connect a valve to a 16c air closer after activating the closer closed shut a valve to close off the air and take the hose off.
Is this possible that someone makes this and the unit will stay closed. Looking for this use on a 5th axis machine that we can't leave the air line connected.

Similar Threads:

• Sealed tube gas mix...
• Pro/e (Creo) Valve/ Valve seat hard stop mechanism
• Interact 2 speed control valve problems (piloted 5 port 2 soleniod valve)
• Tire Valve / Shraeder Valve Dimensions
• Sealed 4 way and 2 way joystick

[UA_Iron]

Looking to find out if its possible to connect a valve to a 16c air closer after activating the closer closed shut a valve to close off the air and take the hose off.
Is this possible that someone makes this and the unit will stay closed. Looking for this use on a 5th axis machine that we can't leave the air line connected.

You want to remove a hose a number of times?

[egvdw]

You want to remove a hose a number of times?

Yes every part. We currently use 90psi in a collet to hold the part. A lot of milling. Time is about 45min. Each