I have the driver, but, i need an other soft


Results 1 to 6 of 6

Thread: I have the driver, but, i need an other soft

  1. #1
    Registered
    Join Date
    Jan 2006
    Location
    Argentina
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default I have the driver, but, i need an other soft

    HI, I'm building My first cnc router, 3 axis, and i have a cuestion, i've created mi oun steppers controller for the paralel port an it works very well but for now onli with Kcam soft, this sot let you setup the pinouts and evrithing to use the LTP port but in not a realy good soft.

    Wich software do you use for the DIY cachines?


    OK, I have problems with the english because i speak spanish so, I gonna write again in spanish, just in case.


    hola, disculpen las molestias, me estoy abricando mi propia router cnc, me arme mi controladora de motores paso a paso de forma casera con un poco de investigacion en la red, sirve atravez del puerto apralelo y la verdad es que funciona muy bien, el problema que tengo es que solo la pude configurar con Kcam que es un soft bastante feo, que sofeare usan para sus maquinas cnc homemade?

    gracias

    thanks

    Similar Threads:


  2. #2
    Registered mikegasman's Avatar
    Join Date
    Aug 2004
    Location
    canada
    Posts
    24
    Downloads
    0
    Uploads
    0


  3. #3
    Registered
    Join Date
    Jan 2006
    Location
    Argentina
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default an other?

    other option? the demo of mach3 thont work realy well with mi hardware



  4. #4
    Gold Member
    Join Date
    Apr 2005
    Location
    US
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default

    I use TurboCNC



  5. #5
    Registered
    Join Date
    Apr 2005
    Location
    bih
    Posts
    462
    Downloads
    0
    Uploads
    0

    Default

    I don't see why mach wouldn't work. It works with pretty much all stepper drivers out there. Even my own home-brew design. Maybe there is something wrong with your hardware? Or maybe you didn't configure mach properly?



  6. #6
    Registered
    Join Date
    Jan 2006
    Location
    Argentina
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default

    I will Try to canfigure it, but the interface is not good, i don't realy likeit



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I have the driver, but, i need an other soft

I have the driver, but, i need an other soft