The problem I have with engineers is that they will take something as simple as a dot on a piece of paper and turn it into many gigabytes of data about that seemingly innocuous little dot, when no one else cares about it.
Good find Paul,
I do like the look of traditional (IV) Roman numerals on clocks, the same way I much prefer an analog watch face over a digital watch face anyday. Unless of course it's a particulary nice Nixie watch!
cheers,
Ian
It's a state of mind!
The problem I have with engineers is that they will take something as simple as a dot on a piece of paper and turn it into many gigabytes of data about that seemingly innocuous little dot, when no one else cares about it.
Good find Paul,
CarveOne
http://www.carveonecncwoodcraft.com
I get some weird requests. Mini trophy mount magnets, 3"x2.5"
First painted piece. I still need to clean up some parts of it and do a second coat.
Random stuff I been doing. A friend wanted something with a moose and the Vectric Paradise Box.
great work, it looks like the machine is working good.
Thank You.
Did another Vectric Paradise Box.
Mini Pbox for a friend.
My CNC Router Build - http://tinyurl.com/c3vs3ca
ROAR!
My CNC Router Build - http://tinyurl.com/c3vs3ca
That's some production line you've got going there!
Do you use any hand rubbed finishes on your wood work? One I use for decorative things like the Paradise box is Cabots Danish Oil (mix of polyurethane and linseed oils), it gives a lustre that's unbelievable!
cheers,
Ian
It's a state of mind!
I mainly use General Finishes Gel stain and Shellac. I think I am going to try some new stuff though soon.
My CNC Router Build - http://tinyurl.com/c3vs3ca
I like that Lion design. Looks good. Is it becoming fun yet?
CarveOne
http://www.carveonecncwoodcraft.com
Loons!
My CNC Router Build - http://tinyurl.com/c3vs3ca
Just like so many of us you had to upgrade as you go... Nice work! On your machine and the items your producing.
Deeds not words...
VoltsAndBolts runs RC for the builder. http://www.voltsandboltsonline.com/ My Forum
A Tisket A Tasket,
Thx C1!
My CNC Router Build - http://tinyurl.com/c3vs3ca