Router Bits and EndMills: Pictures, Descriptions, and Uses - Page 22


Page 22 of 22 FirstFirst ... 1219202122
Results 253 to 261 of 261

Thread: Router Bits and EndMills: Pictures, Descriptions, and Uses

  1. #253
    Registered
    Join Date
    Jun 2012
    Location
    Thailand
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default

    Louie, Gerry
    Thanks both. Seem like you're duo guys in CNCZONE and I'm very appreciate for your help.

    Bun



  2. #254
    Registered
    Join Date
    Jun 2012
    Location
    Thailand
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default

    Thanks Louie and Gerry for advice many times. These bits are flying to my hand.
    Router Bits and EndMills: Pictures, Descriptions, and Uses-s__6365186-jpg



  3. #255
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30529
    Downloads
    0
    Uploads
    0

    Default

    You cost me $50 !! After your last post, I bought 50 HSS 1/4" downcut bits. At $1 each, it doesn't matter if they don't last too long.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #256
    Registered
    Join Date
    Jun 2012
    Location
    Thailand
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default

    That's very cheap. HSS around here're about 2$ each.
    I ask my friend at IL to be my hub and he's flying to Thailand. Very good friend



  5. #257
    Registered LouF's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    1141
    Downloads
    0
    Uploads
    0

    Default

    I have been keeping a good supply on hand.

    http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html


  6. #258
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30529
    Downloads
    0
    Uploads
    0

    Default

    The 50 bits are Onsrud HSS, much more than $2 retail.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #259
    Registered LouF's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    1141
    Downloads
    0
    Uploads
    0

    Default Re: Router Bits and EndMills: Pictures, Descriptions, and Uses

    Router Bits and End Mills Revisited, I am looking for new sources of bits and end mills at a economical price has anyone found any other sellers on Ebay they would like to share?

    http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html


  8. #260
    Gold Member
    Join Date
    Apr 2009
    Location
    USA
    Posts
    5189
    Downloads
    0
    Uploads
    0

    Default Re: Router Bits and EndMills: Pictures, Descriptions, and Uses

    Check out bamcarbide.com. Some good prices there, though I haven't ordered from them yet. You can get Onsrud endmills cheaper at Enco than from Onsrud directly. drillman1 on eBay for the smaller stuff. Also Kodiak Cutting Tools for aluminum endmills. I don't buy cheaper no-name import stuff, since you can get high quality US made stuff for not much more. Basically, don't cheap out.



  9. #261
    Registered LouF's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    1141
    Downloads
    0
    Uploads
    0

    Default Re: Router Bits and EndMills: Pictures, Descriptions, and Uses

    Thanks Louie I will check them out.

    http://www.cnczone.com/forums/diy-cnc-router-table-machines/140832-cnc-software.html


Page 22 of 22 FirstFirst ... 1219202122

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Router Bits and EndMills: Pictures, Descriptions, and Uses
Router Bits and EndMills: Pictures, Descriptions, and Uses