Kavo 4010 spindle - use it or buy other type/brand?

[Yello]

Hi there!

I am in a dilemma! I want to build a CNC drill/router, mainly for PCB use and some alu-milling.

I used to have a Bungard CCD, which I sold a few years ago (yes, I regret it), but I still have a spare Kavo 4010 spindle, however, I don't have the driver and I need a 3.175mm collet.

I guess the driver I can build myself (sort of, ESC, 30V, 8A, 60,000rpm), the collet I guess I can buy somewhere (expensive I guess).

My worry is that the 4010 is primarily a drilling spindle and not really for milling, routing.

Shall I go to complete my spindle or sell it and buy another one? Or is my worry baseless and I should complete that otherwise excellent spindle?

Similar Threads:

• KAVO/ PRECISE SPINDLE VFD
• Kavo 4041 Spindle help
• Newbie- What Type and Brand of machine do i need?
• Need Help!- Spindle drive for KaVo HF spindle?
• KaVo Spindle Owners...

[armaportel]

Do you still have the Kavo 4010 spindle? Is it complete? if you can sell it, how much it will cost? I actually need one of those, I own a bungard CCD and the spindle is broken.

Thanks,

Armando