Sources for 1/8" Plywood or MDF in Florida, USA


Results 1 to 4 of 4

Thread: Sources for 1/8" Plywood or MDF in Florida, USA

  1. #1
    Member
    Join Date
    Feb 2007
    Location
    CUBA
    Posts
    191
    Downloads
    0
    Uploads
    0

    Default Sources for 1/8" Plywood or MDF in Florida, USA

    Hi,

    Please, I need to know where is possible to buy 1/8" MDF or Plywood sheets
    in Miami or nearest as possible in Florida, USA

    Thanks in advance for your help

    Regards

    Rene

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    8082
    Downloads
    0
    Uploads
    0

    Default

    If you do a Google search on Florida Hobby Shops you will find R/C model shops that sell Midwest brand birch aircraft grade plywood in various sizes and thickness. Hobby Super Store is in Plantation, Florida. The link goes to their birch plywood selection.

    CarveOne

    CarveOne
    http://www.carveonecncwoodcraft.com


  3. #3
    Registered PropNut's Avatar
    Join Date
    Feb 2010
    Location
    US
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    Contact your local custom cabinet shop, tell them what you need and you may be able to buy it from them or have them get it for you for a surcharge. Plywood wholesalers sell 1/8" plywood for many uses but it is most often called, and used for, door skin.

    My supplier up here in Michigan is VictorBarnes inc, wholesalers do not sell to the public but cabinet shops are usually pretty good about getting things for people if they do not have to go too far out of their way. You might also check with door manufacturers in your area as they may have scraps the size you want or they too might pass a sheet or two through the door to you for a surcharge.

    Hope this helped,

    David



  4. #4
    Member
    Join Date
    Feb 2007
    Location
    CUBA
    Posts
    191
    Downloads
    0
    Uploads
    0

    Default

    Hi, Carveone and Propnut, I appreciate your help and suggestions.
    Thanks very much.
    Regards
    Rene



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sources for 1/8" Plywood or MDF in Florida, USA

Sources for 1/8" Plywood or MDF in Florida, USA