Cheap easy touch probe

[blmartech]

this is a cheap diy digitizing probe, i have the dxf files available on my website
they are free and there is directions for the toolpaths and assembly.

www.cognitiveinnovations.com


i make people sign up for downloads, it cuts down on leechers and bandwith, it only takes a minute, i dont spam or ever email unless it is to respond to a question.

[Khalid]

blmartech Very nice website and thanks for sharing the picture.. I hope someday I will be able to make one and experiment...

[svenakela]

Here are plenty of versions of the same design, scan through the forum and you shall find.

[blmartech]

thanks, and there are other designs around i made mine based on other designs was just offering the drawings in case anyone else would like them,

also i am not selling anything on my site there is a store but i am not selling anything at this time on my site (work and family are consuming most of my time right now) so i am not doing this as a way to drive traffic to my site and i have no advertisements to make revenue from.

i get nothing from this in any shape or form, the reason i posted on my site is to share with others no on this forum and to be able to make changes as i feel needed...

anyway if you want them you can have them,

also i am orking on sectionals and will update the instructions on my site when they are finished.

[Khalid]

Again thanks for sharing the CAD drawings

[dalescnc]

Seems there is a small problem @ www.cognitiveinnovations.com reg & rec an email but no acctivation link ;-(

[dalescnc]

Ok reg on site is through and download the cad files Thanks for that. Has anyone got the g code files to make the probe? Im still finding my way round cad programs and cant produce the 3d g code Thanks

[dalescnc]

Got the dxf thanks to all here goes will post as soon as im done ;-)

[ranchak]

I tried to get the DXF drawings, but I couldn't register. Site would not recognize my email addresses.

[jalessi]

I encountered the same problem, the site would not recognize email addresses

[blmartech]

everything should be ok now. let me know if you have problems.

[jalessi]

Still has a problem,

There was a problem, the registration mail was not sent, please contact the website administrator.