Need Help! Mitutoyo Touch probe 902329

Results 1 to 2 of 2

Thread: Mitutoyo Touch probe 902329

  1. #1
    Registered Densoman's Avatar
    Join Date
    Feb 2014
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Mitutoyo Touch probe 902329

    I bought this guy on Ebay thinking I could figure it out. I can't find any documentation on it anywhere. It only has two wires connected although the connector has four pins. I thought that that kind of setup would be a normally open or normally closed switch but that does not seem to be the case. Unless this thing is broken. Are there active circuits that only use two wires? If anyone could help me out I would sure appreciate it. I did see another thread with this probe and I left a post there but I was hoping the community could give me a hand.


    Thanks
    Bart

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2009
    Location
    USA
    Posts
    521
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Densoman View Post
    I bought this guy on Ebay thinking I could figure it out. I can't find any documentation on it anywhere. It only has two wires connected although the connector has four pins. I thought that that kind of setup would be a normally open or normally closed switch but that does not seem to be the case. Unless this thing is broken. Are there active circuits that only use two wires? If anyone could help me out I would sure appreciate it. I did see another thread with this probe and I left a post there but I was hoping the community could give me a hand.


    Thanks
    Bart
    Super old post. This is a conductive probe. Pin 1 goes to the probe tip and pin 3 goes to the shank (or vice versa). I have a new one in the box. Thought I would bring closure to this one in case anyone searches for it again.
    Would make a dandy easy touch probe.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitutoyo  Touch probe 902329

Mitutoyo  Touch probe 902329