How can I make this ?


Results 1 to 3 of 3

Thread: How can I make this ?

  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default How can I make this ?

    Hi Guys
    I just came to this Forum .
    I want to make a die cut for a cupcake insert as shown on the photo .
    I have several questions
    1.If I make a die cut like this photo , can i make my insert with hand ? and not with a press tool ?
    I mean just by pushing by hand or my body weight ?
    2. is there and simple instruction for making die cuts ?
    3.what kind of blade should I buy ?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails How can I make this ?-1-jpg   How can I make this ?-die-3-jpg  


  2. #2
    Registered
    Join Date
    Jun 2015
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: How can I make this ?

    You can make a knock off with a hammer and wax board or anything that wont damage your knives, but a press and ejection rubber will obviously save you a lot of time and consistency.



  3. #3
    Member
    Join Date
    Mar 2012
    Location
    USA
    Posts
    378
    Downloads
    0
    Uploads
    0

    Default Re: How can I make this ?

    Do a search on steel rule die and you will find a lot of information and suppliers.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How can I make this ?

How can I make this ?