I can't burn files to CD

Results 1 to 11 of 11

Thread: I can't burn files to CD

  1. #1
    Registered
    Join Date
    Feb 2013
    Location
    United States
    Posts
    195
    Downloads
    0
    Uploads
    0

    Default I can't burn files to CD

    I bought the STL files for a fireplace mantle. I opened the zip file, saved it and tried to burn it to a CD. Almost at the end of the burning process, it came back with an error message. When I check the CD properties, there was 0 bytes available, but the CD was blank. I've tried 3 different times and ruined 3 CD's. I burned another file that was smaller and there was no problem. Has anybody else had a problem with burning files on CD? I plan on burning each file to a separate CD because my computers crash and I don't want to lose everything.

    I tried to upload the pic, but it won't load.

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    29852
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    Maybe you should invest in computers that don't crash?
    How big is the .stl file? Maybe the files are too big to fit on the CD?

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Feb 2013
    Location
    United States
    Posts
    195
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    LOL, I work a poor computer to death. The file is 343mb. At first I thought it might have been too big, but there should have been plenty of room left on the disc.
    How do you keep your files? I've been waiting years now to get my shop/studio finished, and hopefully it won't be much longer now. I've just got to find a good carpenter that I can afford and hopefully one that can work fast. I wasn't sure I'd live long enough to get it done.



  4. #4
    Registered Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    1163
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    I keep my files by backing them up on several computers and thumb drives. All of important stuff is backed up on 3 separate, bootable drives on my desk computer, plus the external backup drive, then a copy goes on my mill computer, on to 2 drives in my router computer, and onto my laptop drive. Then at least 2 thumb drives, at least one of which is always in my pocket. I don't lose files too often.



  5. #5
    Registered
    Join Date
    Feb 2013
    Location
    United States
    Posts
    195
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    Quote Originally Posted by Jim Dawson View Post
    I keep my files by backing them up on several computers and thumb drives. All of important stuff is backed up on 3 separate, bootable drives on my desk computer, plus the external backup drive, then a copy goes on my mill computer, on to 2 drives in my router computer, and onto my laptop drive. Then at least 2 thumb drives, at least one of which is always in my pocket. I don't lose files too often.
    I had all the files on my computer saved to a thumb drive and backed stuff up as I went, but then, after losing the stuff on my computer, the stuff on my flash drive disappeared.

    I've got some old hard drives around here, so I need to do what you are doing if I can ever get organized - I'm either very organized or very unorganized to the extreme. But for the files that I will eventually use on a cnc machine, I was going to keep each file on a separate CD and 'catalog' it. But I still cannot figure out why that file won't burn and wipes out my cd.



  6. #6
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    29852
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    My guess is that it's a problem with your burner, or maybe the software?

    I'm not very good with backups myself, but I have 6 or 7 drives in my PC, and I make copies of important stuff on 3 different drives.
    I also backup stuff to DVD's.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Registered
    Join Date
    Feb 2013
    Location
    United States
    Posts
    195
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    Quote Originally Posted by ger21 View Post
    My guess is that it's a problem with your burner, or maybe the software?

    I'm not very good with backups myself, but I have 6 or 7 drives in my PC, and I make copies of important stuff on 3 different drives.
    I also backup stuff to DVD's.
    I burned another file that I bought at the same time from the same seller and didn't have a problem with it, so I went back and tried to burn that file again with the same result - it wiped out my disc.

    How in the world do you have that many hard drives on a single computer? Do you have a designated computer for your CNC?



  8. #8
    Registered CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    387
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    Burning CDs and DVDs for backup is hardly justified these days. They are slow, bulky, awkward, expensive and not particularly reliable. For a typical home/office backup it makes more sense to buy two or three external hard drives.



  9. #9
    Registered
    Join Date
    Aug 2012
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    Find the nearest microcenter to you. Tell them you want thumb drives. They are huge and cheap, and only a few bucks. Great way to back things up. Sized from 1gb to 256gb!

    Sent from my XT1254 using Tapatalk



  10. #10
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    29852
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    How in the world do you have that many hard drives on a single computer? Do you have a designated computer for your CNC?
    My CNC runs on an old PIII.
    When I built my main PC, I used an SSD, and 3 hard drives. I then added the 3 drives from my old computer (It's a big case).

    As mentioned above, not many people back up to CD these days. I have about 100 backup CD's and DVD's from years gone by, and have never looked at them. The only things I really burn to DVD's now are digital photos.
    I'd just by a 2TB drive for $50, and keep a copy of all of your files on it.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  11. #11
    Registered
    Join Date
    Feb 2013
    Location
    United States
    Posts
    195
    Downloads
    0
    Uploads
    0

    Default Re: I can't burn files to CD

    I need to do something. I'm tired of losing things that I spend 100's of hours finding. I started looking to see how I could connect a CNC to a SD card or thumb drive and operate it on a small touchscreen tablet. But it's hard trying to find the time to search when I'm trying to do legal research too.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I can't burn files to CD
I can't burn files to CD