All,
I bought an Intelitek prolight lathe with all boxes, cables, computer etc. from a college. It operates fine but for some reason won't start the spindle with speed control knob in the "computer" position which is used to cut threads. I did have a minor crash with the tool and spindle but not in the "computer" position and it still works fine with the speed knob in the min/max position. I don't know if that "computer" position ever did work as I am still learning how to operate it. I would like to cut threads and obviously need the machine to work with the computer so I get pause and the spindle and feed working together. Any info or help troubleshooting the control box or speed control would be greatly appreciated. I could send pictures of control box board/guts if that would help.
thanks in advance.
Mike

Similar Threads: