DMU 50 Evo Linear iTNC530 - Setup Program Needed

[Lackey92]

Hi,

I need a working 5 axis program for testing a DMU 50 Evo Linear with a iTNC530 controller. We are having problems getting our postprocessor working. I'm looking for a sample program (ISO G-Code) with contouring motion. I don't care what CAD system created the test program as long the machine creates the correct part. If I can get the model file, CL file used and the final G-Code output file. I will use this data as a target for correct output of my postprocessor. Any help would be appreciated.


Cheers,

Don

[maramb]

here are 2 files from a swarf made on our Hermle C30 witth TNC530

I hope this will help you, it are vector lines, not A and C movements

succes

[Hermle UWF851]

What are the reasons for vector lines? Is that only for the ability to use 3d cutter comp. The only other way I've seen it is

L X**** Y**** Z**** C**** B**** lines in M128(?) mode.
In which case I couldn't use cutter comp. Correct?

[pompey steve]

why would you want to use iso g codes anyway stick with heidenhain its far better