I am trying to use both turrents to mill on spindle 3 at the same time. I am not sure how to synchronize the process. If anyone has any programs performing a similar operation(milling or turning together on either spindle) that they could share I would be very grateful.
This machine has a Seimens 840D control. The programming format is very specific to the Twin series of machines.
DMG Twin 65
try the folks at www.partmaker.com
they have the ability to do this, synchronized.
I know this because I used to write processors for them and created the method that they currently use to do multi-axis swiss synchronized code.
They might not have the SPECIFIC post necessary, but it is very doable within their product.
e-mail me directly if you want more information.
I just read your post. I do not know if you still need help with SIEMENS 840D POWERLINE . IF you stil looking for info let me know. I program twin65, twin42, vertical lathe, mill turn lathe gmx250 linear. I PROGRAM
HEIDENHAIN, SIMENS ,FUNUC, MAZAK
I`m search postprocesor file for machine CTX 410v6 with conntrol SIEMENS 840D POWERLINE.
Please help me.
sorry for bad english
I program twin 65,42 and gmx 400 linear.will send you an example of program once you give me your e-mail adress.do you want me to add notes in nc code explaining what is mc. doing?what twin 65 have you got to program.is it with b axis?please send me more details.