I have the same problem with my maho 600e, it stops the transfer after 6 lines..
Hello,
I know a similar topic is already here. I have an older version of the Maho MH600E. I can not send the program to my machine.
I tried various conneCNC and CademLite programs. When the program is uploaded, the D43 errors are erupted - invalid memory selected, D32- Parity error, D33- word length error, D42- Baudrate and recording is stuck on 21 lines.
I have made a full Handshake cable about 5m long.
I have a machine constant
N771 C1
N772 C3
N773 C30
N775 C1
N776 C600
N777 C600
N796 C0
I do not know the advice anymore
Similar Threads:
I have the same problem with my maho 600e, it stops the transfer after 6 lines..
Problem solved. I gave a handshaking cable and it's ok.
DNC software program and code editor for easy RS232 CNC file transfer 60 day free trial
I did not understand that ? You gave a handshake cable ?
Can you maybe send the pinout from the cable you use ?
I use cable Full Handshake, see link
Http://www.smoregrava.net/Maho/mahomh500.htm