Need Help! Deckel Maho DMC 103V connect to PC


Results 1 to 7 of 7

Thread: Deckel Maho DMC 103V connect to PC

  1. #1
    Registered Cy4's Avatar
    Join Date
    May 2017
    Location
    Albania
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Deckel Maho DMC 103V connect to PC

    How can I connect my Deckel Maho DMC103V to PC/Laptop so I can transfer programs into a machine?
    I was looking around in the internet and there are a couple of ways in general for CNC machines, but I don't know which will work for my machine.


    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC

    Quote Originally Posted by Cy4 View Post
    How can I connect my Deckel Maho DMC103V to PC/Laptop so I can transfer programs into a machine?
    I was looking around in the internet and there are a couple of ways in general for CNC machines, but I don't know which will work for my machine.
    What control does your machine have? If it is a Siemens there is a network connection and 2 RS232 ports. You can use any of them to transfer programs. We use the network connection.
    If the control is a Heidenhain control there is network connections and RS232.



  3. #3
    Registered Cy4's Avatar
    Join Date
    May 2017
    Location
    Albania
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC

    Yes and PC/Laptop dont have anymore RS232 ports what can i use to connect them ?



  4. #4
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC

    Quote Originally Posted by Cy4 View Post
    Yes and PC/Laptop dont have anymore RS232 ports what can i use to connect them ?
    If you want to use RS232 you will need a USB to RS232 converter cable.
    usb to rs-232 db9 serial converter | eBay
    I would just use the network connection and plug the 103 into your router. The network cable is inside the electrical cabinet on the left side. IF it's like my 103's.



  5. #5
    Registered Cy4's Avatar
    Join Date
    May 2017
    Location
    Albania
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC



  6. #6
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC

    Quote Originally Posted by Cy4 View Post
    Take a look at the picture it should help you locate the network cable.
    send me an email address and i'll send the picture to you full size




  7. #7
    Registered
    Join Date
    Oct 2010
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Deckel Maho DMC 103V connect to PC

    In Heidenhian (Millplus IT) you can use CDS Lite and a networks connection. Its super simple to set up. I found the CDS lite on one of the CD's that came with the machine.
    This combo is super fast and allows you to pull the Machine constants, tool tables ect right off the machine and store them for back up on your PC, as well as transfer massive programs onto the controller.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Deckel Maho DMC 103V connect to PC
Deckel Maho DMC 103V connect to PC