Need Help! maho 500 e2 battery fault


Results 1 to 4 of 4

Thread: maho 500 e2 battery fault

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    Macedonia, The Former Yugoslav Republic Of
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default maho 500 e2 battery fault

    I just purchased maho 500 e2 but we discovered that battery had only 1,4 power. We changed the battery and after turning on we can not start the machine. It looks that there is No Power and on main screen there is Hardware Check memory mode 1 failed info. How to start the machine?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default Re: maho 500 e2 battery fault

    did it start before battery change



  3. #3
    Registered
    Join Date
    Apr 2017
    Location
    Macedonia, The Former Yugoslav Republic Of
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: maho 500 e2 battery fault

    I fixed the problem, battery is changed and found person who entered right parameters and its working.
    Thanks



  4. #4
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default Re: maho 500 e2 battery fault

    do you have the parameter as backup now or could you chare the information of the person who helped you out. I still need parameters for a 600e /e2 analoge spindledrive with toolchanger. I tried a lot of parameters but still getting problems ..

    my e mail is kabdelwahid @ gmail



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

maho 500 e2 battery fault

maho 500 e2 battery fault