MAHO MH800E CLEAR PARAMETER:( HELP

[Shumm17]

I HAVE RECENTLY PURCHASED MAHO MH 800 E .


I SWITCHED ON THE MACHINE BUT FOUND PARAMETER LOST.


CAN ANYONE PLEASE HELP ME FOR PARAMETER ?


PL GIVE ME PARAMETER FOR MAHO MH 800 E


THANKING YOU

Similar Threads:

• New Machine Build- Kossel Clear
• Need Help!- Maho 500C and Maho 500 E2
• DRO clear
• What is the weight of Maho MH800E milling machine
• Need Help!- Cant Clear the Alarms

[GPCNC]

Hi,
I can help You with Machine constans but for MH600E2 with CNC 432 , maybe You can use some of the parameters , I have them in electronic copy ( as program to copy via RS232) , I also found that some users here and on diferent forum have their machine ( MH800E)with working constatns maybe You can contact them I'm sure they will be willing to help.
If You like to get from my machine MCs PM me Your e-mail.
I cannt give a 100% guranty that this will work , but it's a start.
BR Paweł

[Shumm17]

MAHO MH 800E with CNC 432 Software, Version 6534.504.
Maschinenummer: 82026


my email: beliysvett@ya.ru

very grateful!!!

[GPCNC]

Machine constans send
Please remember that they are form MH600E2 with ATC proceed with caution please ! Some of the parametrs WILL BE DIFFERENT for sure !
BR Paweł

[Shumm17]

Thank you very much for first aid! Options come - bugs are gone! but the machine does not want to go!

[GPCNC]

Hi Shumm17,
As I said some parameters will be different and those You must find for Your own machine , for sure paremeters that contains Reference point location , If i by any chance step on someone who will habe MH800E machine I will try to send You some more info.
BR Paweł

[ivantarnawiecki]

I am Ivan From Lima Peru : I have all parameters from MH800E with CNC 432 , I you need I can send you a copy.
ivantarnawiecki@yahoo.com

[relraey]

hello all

i need this parameters for MAHO MH600 with CNC432, your quick response much appreciated.

[danandrei]

Hello , anybody haves the parameters for Maho MH800 , with CNC 234 controller ?


I have the punch tape , but don't have where to read it ...


TY !

[kabdelwahid]

I also need the files for the maho 600 if posible

kabdelwahid at gmail.com

[Lohmeyer]

Hello , anybody haves the parameters for Maho MH800 , with CNC 234 controller ?


I have the punch tape , but don't have where to read it ...


TY !

I have a punch tape reader which can read your tape. It is much better if you can find someone locally with a punch tape reader. Any punch tape reader will work. But if you get desperate, I can help. I would need the tape, of course, and then I could send an ASCII file back to you by email, and mail the tape back to you when done.

Alternatively, Google about ASCII and punch tapes, and you can decode the holes in the tape yourself (it is just 7 bit ASCII - a hole is a 1, a non-hole is a 0). It will take some time, but it is human readable and you can get the info you need from the tape.

PM me if you need help.

Regards,
Michael