The new one here. Using fanuc series 0i-TC controls. What type of postprocessor do I have to use? (Mastercam lathe x2). I need to work with X.Z.C. axis but mastercam is not generating the G codes right. For example there is no M23 command in the user manual but mastercam generates it. Curently using GENERIC FANUC 4x MT_LATHE.PST post.
Have a look in C:\mcamx\lathe\posts directory
here you will find a file called Generic Fanuc 4X MT_Lathe.pst
copy this file and rename to L220MPST.pst
Open this file with notepad
search for M23 and change to M33
search for M24 and change to M35
there are many other edits you need to get this post up to standard
or ... you could pay some one to write one for you
***********************************************************
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
***********************************************************
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity http://www.oxfam.org/en/getinvolved_______*
***********************************************************
Posting Permissions
LinkBack URL
About LinkBacks
