2006 Doosan 2000sy Fanuc 18i-TB

[mroy0404]

Hello

I recently bought a 2006 Doosan 2000sy with a Fanuc 18i-TB control. When the control is turned on it will display "loading graphics", then display "loading manual guide i"
Once it has finished loading control is now on, I now can't find the manual guide i anywhere on the display. When I press the custom button it is just not there. I have attached pic's of the special settings parameters, would some of you more experianced gentlemen take alook at them an tell me if this control is capable of Manual Guide i an how to get it going.

Thank you for your time.

[dcoupar]

What is the serial number of the machine?

[mroy0404]

S/N is P200SY0764

[dcoupar]

I've sent an email to the Applications department at Doosan to see if that machine was ordered with "EZ Guide" (Doosan's version of Manual Guide). There was a change to EZ Guide-i announced in October of 2006. I'll let you know when I get an answer.

[mroy0404]

Thank you very much, im going to look on the net for some kind of manuals for this EZ guide i.


Thanks again.

Mike Roy in Canada