VT1100 m code

[zman300]

Have a 2009 VT1100 with 32i control.

For the auto door the book says m52 open, m53 close.
But the machine works m53 open, m52 close.

Anyone have a Doosan that works with the same door codes.
Just curious if the machine or book are wrong.
Thanks

[MysticMonkey]

You would need to trace the wires from the I/O board to ensure

the correct signal went to the correct relay
then the correct signal came from the correct relay to the correct solenoid

or you could just use it like this and call yourself quirky

[zman300]

lol
I'll probably go with quirky.

I ask because the dealer told me the machine is correct and the book has a typo.
But I suspect he didn't want to correct the machine, maybe not.

Originally Posted by MysticMonkey You would need to trace the wires from the I/O board to ensure the correct signal went to the correct relay then the correct signal came from the correct relay to the correct solenoid or you could just use it like this and call yourself quirky

[MysticMonkey]

Originally Posted by zman300 lol I'll probably go with quirky. I ask because the dealer told me the machine is correct and the book has a typo. But I suspect he didn't want to correct the machine, maybe not.

HMM well It's not just your book the M-Codes are standard across the Doosan range.
They all say

52 = open
53 = closed