| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Daewoo/Doosan Discuss Daewoo/Doosan machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-26-2009, 10:52 PM
| ||||
| ||||
hi i have a daewoo puma 10 with fanuc 6t control it wont cancell ofsets... i use this format below gog50x5.z5. t202 (can cycle moves here) g40x5.z5. to2o2 it seems to retain offset value upon putting in next part an adds it.. example .. u.01in offsets becomes 020 in next and on up.. i am at my whits end ! can this be mechanical?or defalts? old operator no longer here .. i am aneewbe thanks harleydog heritagetool@fuse.net    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Daewoo Puma 6 with 3tf | mmxmb | Daewoo/Doosan | 1 | 04-06-2011 08:36 AM |
| Daewoo puma 8s | mroy0404 | Daewoo/Doosan | 3 | 06-14-2010 02:58 AM |
| Need Help!- Bar puller for Daewoo puma 8 | jvanbysteren | Daewoo/Doosan | 8 | 06-01-2009 12:54 AM |
| I Need to buy a Daewoo Puma 8 | gcrudgington | Daewoo/Doosan | 2 | 10-20-2008 06:24 PM |
| Daewoo Puma 200 | williamsxu | Daewoo/Doosan | 10 | 01-17-2007 05:52 PM |
| | |
Linear Mode
