Newbie- 15 yr Daewoo Service Enginneer

[Dr Dug]

Originally Posted by MadMax Hi Von, I finally got a chance to check my software revision. Unfortunately, I couldn't get the rev' with your instructions. I don't have a "maintenance" option in the softkey selections. I'll see what I can find and put it all up for you to take a look at. Would the revision come up in the startup screen?

MadMax
The "softkey" should say "Maint Info"
If this is blank, open the back of the control panel (behind the screen); the revision should be there also.

[STS_Kevin]

Hello Von,

I'm new hear too. I've been running doosan and haas for 5 years+.
nice to meet you.

[paerca]

Von, Very nice to have such expert advice available on the forum.

I have a late 90's Daewoo DMV400 with a Fanuc 18 M control. The 30 tool changer is full with "dedicated" tools and I have a need to add more tools to add more jobs to the work center. I have called our local service representative and he was no help.

I need to be able to get into the pocket assignment table and assign tools to specific pots. I can not find the assignment table on the control.

Any hints would be much appreciated. Thanks.

[ming035]

I operate a puma 400L, it's fanuc 21i-tb controler. I don't know how to preview a program , maybe it is graph check. But when I turn to MEM, and press GRAPH, can't find exec and head