Need Help!- Daewoo parameters lost

[andyb4]

Hello all,
I have a Daewoo ACE - H100 machining center that has lost memory and have no back-up parameters or macro programs.
This machine has a Fanuc 15-M model A control, with a 2 pallet changer, and a 60 tool magazine.
I am looking for the parameters and I believe macro programs for the table index, pallet change and tool changer. If anyone can help me it would be greatly appreciated. Thanks in advance.
Andy

[MysticMonkey]

These are the Doosan dealers in Canada

Contact one of them, they will probably be able to help.

Central

Moore Industrial Ltd. (Alberta)
Address: 5431- 99 Street, Edmonton, Alberta T6E 3N8, Canada
Phone: 780-914-1149
Fax: 780-435-6902
Email: RMyall@mooreindustrial.com

Moore Industrial Ltd. (Saskatchewan)
Address: 18 - 3111 Millar Avenue, Saskatoon, Saskatchewan S7K 6N3, Canada
Phone: 306-653-7788
Fax: 306-653-7785
Email: RMyall@mooreindustrial.com

Moore Industrial Ltd. (Manitoba - Head Office)
Address: 169 Omands Creek Blvd., Winnepeg, Manitoba R2R 1V9, Canada
Phone: 204-632-4092
Fax: 204-632-9392
Email: RMyall@mooreindustrial.com

East

Ferro Technique Ltd. (E. Canada - Ontario)
Address: 5620 Timberlea Blvd., Mississauga, Ontario L4W 4M6, Canada
Phone: 905-890-3231
Fax: 905-890-1525
Email: BrianD@FerroTechnique.com

Ferro Technique Ltd. (E. Canada - Quebec)
Address: 9425 Trans Canada, St. Laurent, Quebec H4S 1V3, Canada
Phone: 514-341-3450 / 514-341-3415
Fax: 514-341-1866
Email: Info@FerroTechnique.com

West

Paine Machine Tool Inc. (British Columbia)
Address: #8 7355 72ND ST. DELTA, B.C CANADA
Phone: 604-940-1657
Fax: 604-940-1658
Email: jeremy@painemachine.com

[andyb4]

Thank you for the reply. I will give this a try and let you know.

[andyb4]

Dealer in Mississauga has been helpful. received a pdf file of the parameters for a sister machine. Half way there. Need some time to reason though and should be there. Thanks again

[andyb4]

Machine is mostly functional. Still looking for macro programs for the tool changer, pallet changer etc.

[andyb4]

Machine is mostly functional. Still looking for macro programs, I believe, for pallet changer, tool changer, etc. Getting there slowly

[MysticMonkey]

Do you have a list of the m-codes for you machine ?

You should be able to work through to see which codes you need and build a macro based around those.

[resuengineering]

And off we go....

http://www.draaitechniek.nl/cnczone/HC_Pallet_macro.zip

http://www.draaitechniek.nl/cnczone/HC_Tool_macro.zip

Please let me know if its working for you.....
if yes feel free to donate my paypal

may need some fine tuning

[andyb4]

yes I do have the M codes, and thank you so much for the programs. I will see what happens. Thanks again

[andyb4]

Slowly working through things. All axis will go home. B indexing table will not respond yet. Looking through Ladder and I/O tables and it seems to be that the B axis is interlocked due to AL30 which is a ATC control alarm. Nothing is as simple as it appears. Guess that is why the more back-ups you have the better. Thanks again for your assistance.

[MysticMonkey]

Are you able to transfer the Ladder/Schematic to electronic form and post here ?

[andyb4]

Will take a while to scan but is definately possible. Thanks