dmv 4020 sapre m-codes

[1234567]

does anybody know how to hook up a indexer so i can call out a m code in my nc program.and send a signal to my indexer? i cant find the wireing book .

[dcoupar]

What serial number? What control?

[dcoupar]

From what I can tell, extra M-codes are an option ($500). This gives 2 M-codes (M91&M92). I would suggest you contact your local Doosan reseller.

[1234567]

s/n av5e2842 fanuc 21 i mb

[MysticMonkey]

According to the manual I am looking at AV5DH21BB01
There are 4 M-Codes to choose from

These may all be different so you will need to check the portion of ladder associated with that M-Code.

SLOT1
Coil 24 Output
M91 - Y3.4 - (EM91.R) - Pin 19
M92 - Y3.5 - (EM92.R) - Pin 34
M93 - Y3.6 - (EM93.R) - Pin 1
M94 - Y3.7 - (EM94.R) - Pin 33

Coil 0v Common
M

All M-Finish on X6.2 (EMF.M)

and you can connect to
KA91
M91A + M91B
KA92
M92A + M92B
KA93
M93A + M93B
KA94
M94A + M94B

Being the switches on the relay coils

But as dcoupar states they are an option

GL

[1234567]

thank you ill take a look.