Results 1 to 5 of 5

Thread: DAEWOO PUMA 10 PARTS BOOK

  1. #1
    Registered harleydog's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Cool DAEWOO PUMA 10 PARTS BOOK

    HOPE EVERYONE HAD A GOOD THANKSGIVING!!!

    I NEED A DAEWOO PUMA 10 PARTS & SERVICE MANUAL.
    I WANT TO REBUILD / REPAIR AND MAINTANCE PROJECT


    ANYBODY HAVE A IDEA? SOURCE

    THANKS IN ADVANCE
    HARLEYDOG


  2. #2
    Registered dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2,502
    Downloads
    0
    Uploads
    0
    What's the serial number?


  3. #3
    Registered
    Join Date
    Apr 2008
    Location
    israel
    Posts
    43
    Downloads
    0
    Uploads
    0
    I have the puma 10 S with all the books (from 1995). sending you all the books is too much but I will be happy to assist.


  4. #4
    Registered harleydog's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Talking

    thanks for reply
    sorry i am late answering;;

    i found one for my machine on ebay..
    however its a poor copy...
    i have offset problem now .. they wont cancell and keep adding up..
    cant figure it out..
    sure miss the old guy operator

    thanks lost in puma ville!
    harleydog



    heritagetool@fuse.net


  • #5
    Registered
    Join Date
    Sep 2007
    Location
    Mexico
    Posts
    347
    Downloads
    0
    Uploads
    0
    Hi Harleydog, I was wondering if your machine has a Fanuc 10T controller, I have a Puma 10 lathe with that control and I loose all parameters, unforntunatelly no backup, if you can share a copy of the NC and PC parameters I will be very very happy.

    Please let me know.

    Greg.


  • Similar Threads

    1. Need Help!- Daewoo Puma 6 with 3tf
      By mmxmb in forum Daewoo/Doosan
      Replies: 1
      Last Post: 04-06-2011, 08:36 AM
    2. Daewoo puma 8s
      By mroy0404 in forum Daewoo/Doosan
      Replies: 3
      Last Post: 06-14-2010, 02:58 AM
    3. I Need to buy a Daewoo Puma 8
      By gcrudgington in forum Daewoo/Doosan
      Replies: 2
      Last Post: 10-20-2008, 06:24 PM
    4. Daewoo Puma 200
      By williamsxu in forum Daewoo/Doosan
      Replies: 10
      Last Post: 01-17-2007, 05:52 PM
    5. Puma 6s electric wiring schematic book
      By emergent in forum Daewoo/Doosan
      Replies: 1
      Last Post: 03-13-2006, 10:38 PM

    Tags for this Thread

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.