locking *backdoors in puma lm400 and xlm400?

[kikakii]

Hallo!
Excuase my bad english!
We want to know if there is a possibilitie to lock the *backdoors on Puma LM 400 and XLM 400, its kind of enoying to need to wait for the *backdoor to finish moving before you can unclamp the chuck.
Or maybe solve it by programing? Thankfull for any answers that can be helpful.
Thanks!

[Daewoosan]

You may want to try commanding an M31 before the M69 for the chuck unclamp. This is an interlock bypass that might allow the chuck to unclamp in the condition that you describe. When you said *backdoors, were you refering to the tailstock?

Sometimes you can request a ladder change from your distributor. This may also allow you to move the tailstock while unclamping the chuck.

Perhaps you can ask your question in your language, and I can translate it online with http://babelfish.yahoo.com/.

Hallo ist ein deutsches Wort. Sprechen Sie Deutsch?

[kikakii]

Tanks for answering and no...
Im talking about the doors, operating doors on the machine.
We want to "stop" the door that moves to *the right (when its opening), because it takes such time and it keeps the chuck looked until its finished moving.
We decidedthat programing the overide to the chuck isnt an option because of the details we produce.

Und nein Ich sprechen nicht Deutsch, Ich bin Schwedisch.