Daewoo Lynx Draw tube

[mekp21]

We have a Daewoo Lynx which one of our former employees cross threaded the chuck onto the draw tube and mangled them to almost unusability. We managed to get the 5C spindle nose on about 3 threads (hoping it holds). We have tried calling Daewoo themselves along with the company we bought the machine from and they say they cannot supply use with a new draw tube. Short of remaking the drawtube from scratch ourselves we are at a loss. We did check with a couple of too and supply vendors and was quoted anywhere from $2000 to $5000 for a custom one. Now I'm looking for ideas on where I might want to look for a reasonable replacement

[dcoupar]

What is the model and serial number of the machine? Also, see if you can get the chuck and cylinder model numbers.

[mekp21]

model : Lynx L210A
serial : L2103551
Spindle nose : ASA-A2-5
Chuck : HS-06
Cylinder : SYH1246

Want any other info just hollar
Jason

[PBMW]

Dcoupar
I was just going to suggest you guys.....

[dcoupar]

PBMW: Thanks for keeping us in mind.

mekp21: Checking if we can get a replacement.

[dcoupar]

If you're located in Nevada, your Doosan reseller is CNC Solutions in Milpitas (408)586-8236. I would suggest that you call them first. If they can't help you, get back to me, and we will.

You need a:

P/N L30183033F
Tube, Draw 563x52x46
List Price: $425.82
In Stock (New Jersey)

[dcoupar]

So, mekp21: What's happening? Did you fall off the face of the earth?