DAEWOO LYNX 220LM

[jackson]

I have a Operator Message (alarm) that i can figure out how to fix
NO. 2067
The Tool & Rev. Spindle Indexing Condition Alarm. Check Confirmation Switch In Tool Post Unit

Has anyone had this before and what did you have to do to fix it

Thank, You

[Jarwalcot]

Try, indexing the turret in... then in mdi attempt to rotate the spindle.

What happens?

[jackson]

I wont do anything you move the turret in X & Z but that is it

[Jarwalcot]

individual who perceives a solution and is willing to take command. Very often, that individual is crazy... Rather be crazy than sit back and wait for someone else...

Try to home Z and X... Do they home in the correct position?

[CNCaveman]

I run a lynx 220 LM every day and i have seen that message before. when I got that message it was because i tried to index the turret and bumped a tool on something whch caused the index motor to alarm out in the middle of a tool change when the turret was in between positions. the way I fixed it was to zero return the X and Z axis' and then put the machine in handle mode and manually index the turret. If that doesnt work for you try turning it off and then do it again? let me know how it goes

[jackson]

I have tried all that and nothing is working but thanks i will keep trying

[pumajason]

im a service engineer in the uk and when this happens its usually the proxy switch not been made on the tool clamp/orientation cylinder take the cover off to the right of the turret and check or if you like you can check with keep relays and manually clamo and unclamp the cylinder and check with the pmc

[ndp]

I have a Operator Message (alarm) that i can figure out how to fix
NO. 2067
The Tool & Rev. Spindle Indexing Condition Alarm. Check Confirmation Switch In Tool Post Unit [/COLOR]

Has anyone had this before and what did you have to do to fix it

Thank, You

[ndp]

Originally Posted by pumajason im a service engineer in the uk and when this happens its usually the proxy switch not been made on the tool clamp/orientation cylinder take the cover off to the right of the turret and check or if you like you can check with keep relays and manually clamo and unclamp the cylinder and check with the pmc

I opened the back cover and found 2 proxy switches there. Both are on ( orange light ). What else can be wrong?

[Steve Beck]

just bought for RESALE a LIKE NEW Doosan/Daewoo Lynx 200LM; clal if interested
303-651-6545, Steve

[MysticMonkey]

I have sen this occur when the live tooling is not oriented 100% correctly and the live tool tang moves the drive out of position during tool change

solution alter P4077 S2 until orientation of 2nd spindle is correct again

[cnc-king]

mystic is correct your live tool has moved out of orient position. we broke the drive tang off one of our live tool from this error