Any Sample programs with live tooling for Daewoo 700 with Fanuc 18i

[bdyenter]

Any Sample programs with live tooling for Daewoo 700 with Fanuc 18i?

I am looking to start utilizing the live tooling in my machine but would like to look at a format of someone's that has drilled and tapped "x" amount of holes on a bolt circle.... and possibly milled slots on face.

Thanks for any help anyone can offer to me.

Bryan

[M-man]

Here is a drilling ex, done on a puma 300m with fanuc 18iT.
As you can se it is in metric.

(C-DRILLING)
M35
G28H0
N0005G0X250.Z250.C0.T0900
G98G97S2300M33
Z2.5T0909M8
X66.
G83Z-25R0.Q3000F345.M89 ----M89 Clamp/high on. Q3000 --- Pecking amount 3mm.
C18Q3000
C36Q3000
C54Q3000
C72Q3000
C90Q3000
C108Q3000
C126Q3000
C144Q3000
C162Q3000
C180Q3000
C198Q3000
C216Q3000
C234Q3000
C252Q3000
C270Q3000
C288Q3000
C306Q3000
C324Q3000
C342Q3000
G0X250.T0900M9
Z250.
G80
G99
M1

I could get some examples after I ve been to work.

[jessegrnv]

this is a simple 4 holes on a 5 in. bolt circle
G0G54T0101S2500M33
G0X5.0Z.1
G0C0.0
G83Z-1.0Q1000F.002
H90.0
H90.0
H90.0
G80
G0Z1.0
G30U0W0
M1