| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Daewoo/Doosan Discuss Daewoo/Doosan machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-24-2007, 08:59 AM
| |||
| |||
I have a Daewoo Puma 230m(c-axis) with a fanuc 21i-TB control Can I program the tailstock within the part program? My software just put a M00 and a coment to say advance tailstock. If it can be done does anyone know the proceedure? Thanks BigBill  |
|
#3
05-25-2007, 07:38 AM
| ||||
| ||||
| Check Keep Relay #9 bit 5. If it's a 1, you have the "programmable" tailstock. Position Z over the "traction bar" (probably Z home) M46 extends the traction bar and unclamps the tailstock. Move Z to the desired position. M47 retracts the traction bar and clamps the tailstock body. M78 and M79 are the quill forward and retract commands. M31 allows the tailstock to move with the spindle turning. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Daewoo puma 8s | mroy0404 | Daewoo/Doosan | 3 | 06-14-2010 01:58 AM |
| Daewoo Puma 700 LM - Lathe | Kim | Daewoo/Doosan | 2 | 04-18-2008 01:18 PM |
| Daewoo Puma 200 | williamsxu | Daewoo/Doosan | 10 | 01-17-2007 04:52 PM |
| Daewoo Puma 200c W/18t. | JIMMYZ | Daewoo/Doosan | 1 | 10-26-2006 10:10 AM |
| Daewoo Puma Service | ap-machine | Daewoo/Doosan | 7 | 09-21-2005 06:11 AM |
| | |
Linear Mode
