| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Daewoo/Doosan Discuss Daewoo/Doosan machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
12-07-2006, 05:55 PM
| |||
| |||
| write a program like this N0010 M69(OPEN COLLET) N0020 G04X.5 (DWELL) N0030 M68(CLOSE COLLET) N0040 M30 CHUCK SHOULD OPEN AND CLOSE IN CYCLE START MY NAKAMURA USES M10 TO OPEN AND M11 TO CLOSE. IT WILL ONLY CLOSE IN AUTOMATIC MODE. IT WILL NOT INPUT THE M11 IN MDI MODE  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
