Page 1 of 2 12 LastLast
Results 1 to 12 of 15

Thread: OLD PUMA 6S, 10HC

  1. #1
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0

    OLD PUMA 6S, 10HC

    I need install Patrol Light Control RED, GREEN, YELLOW.
    I have the lamps. But I cannot find this signals on electric
    inside. I know how on PUMA 250/300/400. But I don't know
    what I have to do with old PUMAs. Is it possible?


  2. #2
    Registered MysticMonkey's Avatar
    Join Date
    Mar 2009
    Location
    Australia
    Posts
    367
    Downloads
    0
    Uploads
    0
    6S OT-C - uses
    Y51.0 = YELLOW
    Y51.1 = GREEN
    Y51.2 = RED
    TO 24M for the relay coils

    10HC OT-C- uses
    Y51.0 = GREEN
    Y51.1 = YELLOW
    Y51.2 = RED
    TO L+ for the relay coils
    ***********************************************************
    *~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
    ***********************************************************
    *__________If you feel inclined to pay for the support you receive__________*
    *_______Please give to charity http://www.oxfam.org/en/getinvolved_______*
    ***********************************************************


  3. #3
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    Thank you for your help.
    I found this. The connectors were hide.
    Y51.0 = YELLOW = PTY
    Y51.1 = GREEN = PTG
    Y51.2 = RED = PTR
    After install the relays
    I can use this signals.


  4. #4
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0

    Old Pumas

    Settings for shut up this light
    Diagnostic parameter X0001=00000111
    It is right?


  • #5
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    Please give me parameter # for shut up this light.


  • #6
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    Thank you. Don't need help.
    Diagnostic param # Y0051=00000111


  • #7
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    This parameter is output signals.
    Where is shut up this light?
    I don't have the signals GREEN, YELLOW, RED
    on wires PTG, PTY, PTR during PUMA'S work.


  • #8
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    Done. Finish. This parameter is D0444 = 00000111.


  • #9
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    No finish. This parameter D0444=00000111
    working only for PUMA 6S. Need help.
    Who knows this one for PUMA 10HC?
    D0444 for PUMA 10HC no working.


  • #10
    Registered MysticMonkey's Avatar
    Join Date
    Mar 2009
    Location
    Australia
    Posts
    367
    Downloads
    0
    Uploads
    0
    D304.0 = Red
    D304.1 = Yellow
    D304.2 = Green
    ***********************************************************
    *~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
    ***********************************************************
    *__________If you feel inclined to pay for the support you receive__________*
    *_______Please give to charity http://www.oxfam.org/en/getinvolved_______*
    ***********************************************************


  • #11
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    D0304 no working.
    Maybe D0310?


  • #12
    Registered
    Join Date
    Aug 2011
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0
    Yes. D0304. Something wrong with electric.
    Thank you.


  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Replies: 1
      Last Post: 03-09-2011, 08:43 PM
    2. Need Help!- 88 puma 6 or 10
      By Cartel, LLC in forum Daewoo/Doosan
      Replies: 1
      Last Post: 11-29-2010, 10:07 PM
    3. Need Help!- Puma 700
      By lathe guy in forum Daewoo/Doosan
      Replies: 1
      Last Post: 01-27-2010, 09:34 PM
    4. NEED HELP WITH PUMA 200
      By CNCBEN in forum Daewoo/Doosan
      Replies: 2
      Last Post: 09-16-2009, 11:52 AM
    5. Puma
      By M-man in forum Daewoo/Doosan
      Replies: 1
      Last Post: 05-13-2008, 10:25 PM

    Tags for this Thread

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.