HELP Dwell code wont read.

[bhbjb]

Out of the blue the Lynx 200l with Mitb. Control wont read a dwell code any advise.

[Technical Ted]

Did you use a decimal point?
G04 X1 is just .001 of a second.
G04 X1. is one second.

[bhbjb]

Yes tried everything G04 P4000 G04 X1.0 just doesnt read code or doesnt dwell just did this out of blue.

[dcoupar]

Have you tried G94 G04 X1.0 (On the M500L G94 is dwell per second)