Results 1 to 2 of 2

Thread: 93 8HC alarm 7

  1. #1
    Registered
    Join Date
    Apr 2009
    Location
    USA
    Posts
    14
    Downloads
    0
    Uploads
    0

    93 8HC alarm 7

    old 1993 puma 8HC, ran yesterday but hydralic press went low once, adjusted at pump and was fine.This morning alarm 7 comes on and no action from hydralic pump(no juice to it) any ideas?


  2. #2
    Registered MysticMonkey's Avatar
    Join Date
    Mar 2009
    Location
    Australia
    Posts
    367
    Downloads
    0
    Uploads
    0
    get the electrics tested for the pump 3phase voltage/ insulation etc
    ***********************************************************
    *~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
    ***********************************************************
    *__________If you feel inclined to pay for the support you receive__________*
    *_______Please give to charity http://www.oxfam.org/en/getinvolved_______*
    ***********************************************************


Similar Threads

  1. ALARM shuttle drawbar alarm haas
    By timmydabull in forum Haas Mills
    Replies: 28
    Last Post: 02-18-2013, 01:47 PM
  2. Problem- (ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
    By PICMAN in forum Fanuc
    Replies: 15
    Last Post: 11-09-2012, 06:11 PM
  3. Replies: 6
    Last Post: 04-29-2011, 06:20 PM
  4. Need Help!- 750 ALARM SPINDLE-1 ALARM DETECT (AL11)
    By PICMAN in forum Fanuc
    Replies: 9
    Last Post: 03-27-2011, 07:14 PM
  5. Need Help!- DAEWOO 8 Steady rest pressure alarm, External feed hold alarm
    By doubleeagle in forum Daewoo/Doosan
    Replies: 4
    Last Post: 06-12-2009, 04:15 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.