Check on the Placard.
They should show if CSA, UL, ETA certs.
EXAMPLE shown: attached
MACHINE : DOOSAN PUMA 240 2013
Does any know if this machine is compliant with UL
I need to make a UL certification on this machine , does any body went true the certification on this machine , what was your experience ?
does the machine is full compliant or you have to replace parts ? , if you do approximate how much was the repair .
i am trying to find out before do the labeling if it is not a crazy amount to make it compliant , i here of other machines brand that brand new has to spend $15000 to make them compliant
of course the company take care of that but in my case the machine is not new
thanks
Daniel
Similar Threads:
Check on the Placard.
They should show if CSA, UL, ETA certs.
EXAMPLE shown: attached
No longer with Doosan Machine Tools America
darrylhardt@gmail.com
Find out as stated, but check if it HAS to be UL, or any NRTL cert. Most places allow the ETL, TUV etc. UL is by far the most expensive to have field certified.
Sent from my SM-T813 using Tapatalk
NO the plate does not have the NRTL logo on it , i may believe they start after 2013