- doosan lynx 5 axis help
-
Registered
doosan lynx 5 axis help
Hi folks I'm machining a part but require a 12mm end mill to machine a 30 degree angle using the y and z plane. Is it possible to do this using the angle feature i.e. for x and z plane
G0 x50 z2
G1,A180 r2 f0.2
,A110 x75
G0 x200 z200 m5
M1
It saves you working out the start and end points of the radius in the above example.
Thanks in advance
Similar Threads:
-
- doosan lynx 5 axis help
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules