- Need Help!- Live tool helical milling - 10 holes on face. No y axis, Need help!
-
Registered
Live tool helical milling - 10 holes on face. No y axis, Need help!
i need to put 10 holes on the face. I pilot drill them thru with a .6875 drill, but then
I need to interpolate a counter bore on a 24" B.C at 1.66 inch deep and 1.437 dia. Can use a .500 -.625 end mill. I know I need to use the G12.1. I have a Doosan PUMA 700. I have no Y axis. Just X, Z, C. Looking for an example of helical milling program on this.
Thanks
Similar Threads:
-
-
Member
Re: Live tool helical milling - 10 holes on face. No y axis, Need help!
Hi
Non Y-axis machines don't have the helical milling as standard, it's a field install option. So, in this case, you could order the option from Doosan, or have your CAM system write out the code long hand.
-Doug
- Need Help!- Live tool helical milling - 10 holes on face. No y axis, Need help!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules