Milling tool (upper head)?
or
Live tool drive (turret)?
Does anybody know the procedure to align the live tooling drive with the tool holder on a Doosan MX2000ST
Similar Threads:
Milling tool (upper head)?
or
Live tool drive (turret)?
No longer with Doosan Machine Tools America
darrylhardt@gmail.com
Sorry Live drive lower turret
What is the full Serial number of the machine? (I might have something of the same range, but I wouldn't have yours unless it was sold through an American Dealer)
No longer with Doosan Machine Tools America
darrylhardt@gmail.com
Your machine appears to have a Rear-Mount live tool in the lower turret.
Use the instructions from the Puma 24MS Maintenance manual posted in the following link.
http://www.cnczone.com/forums/daewoo...achines-2.html
use the manual as a guide, but do not use the parts list as it is a different machine.
No longer with Doosan Machine Tools America
darrylhardt@gmail.com
Hi
The serial Number is MX20ST0030
Model Number MX2000ST
Where you able to get this resolved? ...was the manual I linked of any assistance?
No longer with Doosan Machine Tools America
darrylhardt@gmail.com