Adjust spindle oriantation Doosan DNM 650

[togr]

Hello guys.

The driving belt on the spindle of our Doosan DNM 650 has been changed beacuse the old one broke.

Do somone have a guidence for dummies of howe to adjust the spindle oriantation?

Sent fra min SM-G950F via Tapatalk

Similar Threads:

• Need Help!- TT1800 SY Easy way to adjust spindle phase & speed sync
• Need Help!- faster spindle... Do I need to adjust feeds??
• How to adjust spindle speed of a dc motor?
• Rong Fu 31 spindle adjust
• Spindle Orientation Position Adjust

[lshingleton]

Try parameter #4077
Most Fanuc controls still use this to set orientations of a Spindle as in M19
Can be a plus or minus number and can and 500 is 30 deg or something like that

[togr]

Try parameter #4077
Most Fanuc controls still use this to set orientations of a Spindle as in M19
Can be a plus or minus number and can and 500 is 30 deg or something like that

Thank you for anwser.

We solved it the next day.
You are right. It is parametet 4077.

Sent fra min SM-G950F via Tapatalk