Try parameter #4077
Most Fanuc controls still use this to set orientations of a Spindle as in M19
Can be a plus or minus number and can and 500 is 30 deg or something like that
Hello guys.
The driving belt on the spindle of our Doosan DNM 650 has been changed beacuse the old one broke.
Do somone have a guidence for dummies of howe to adjust the spindle oriantation?
Sent fra min SM-G950F via Tapatalk
Similar Threads:
Try parameter #4077
Most Fanuc controls still use this to set orientations of a Spindle as in M19
Can be a plus or minus number and can and 500 is 30 deg or something like that