Puma 240 LC Turret Alignment

Results 1 to 2 of 2

Thread: Puma 240 LC Turret Alignment

  1. #1
    Registered
    Join Date
    May 2010
    Location
    US
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Puma 240 LC Turret Alignment

    Bought a 240L on auction that was supposedly running but the turret is out of alignment approx. 15 degrees. Basically, centerline of stock is between 2 tools. Is this corrected within the turret or in the machine parameters? The machine is a 2005 model.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2010
    Location
    US
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Puma 240 LC Turret Alignment

    I keep reading about unclamping turret and moving it by hand. how do you do this?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Puma 240 LC Turret Alignment

Puma 240 LC Turret Alignment